跳到主要内容

加解密(C/C++)

以AES256、RSA1024、SM2和DES64为例，完成加解密。具体的场景介绍及支持的算法规格，请参考加解密支持的算法。

在CMake脚本中链接相关动态库​

target_link_libraries(entry PUBLIC libhuks_ndk.z.so)

开发步骤​

生成密钥

  1. 指定密钥别名，密钥别名命名规范参考密钥生成介绍及算法规格。
  2. 初始化密钥属性集。
  3. 调用OH_Huks_GenerateKeyItem生成密钥，具体请参考密钥生成。

除此之外，开发者也可以参考密钥导入，导入已有的密钥。

加密

  1. 获取密钥别名。

  2. 获取待加密的数据。

  3. 调用OH_Huks_InitParamSet指定算法参数配置。

    文档中提供多个示例，当使用不同算法时，请注意配置对应参数。

    • 使用AES算法加密，选取的分组模式为CBC、填充模式为PKCS7时，参数IV必选，请见开发案例：AES/CBC/PKCS7。
    • 使用AES算法加密，选取的分组模式为GCM时，参数NONCE可选，AAD可选，请见开发案例：AES/GCM/NoPadding。
    • 使用AES算法加密，选取的分组模式为CCM时，参数NONCE可选，AAD可选，请见开发案例：AES/CCM/NoPadding。
    • 使用RSA算法加密，需要选择相对应的分组模式、填充模式以及摘要算法DIGEST，请见开发案例：RSA/ECB/PKCS1_V1_5和RSA/ECB/OAEP/SHA256。
    • 使用SM2算法加密，摘要算法DIGEST需要指定为SM3，请见开发案例：SM2。

    详细规格请参考加密/解密介绍及算法规格。

  4. 调用OH_Huks_InitSession初始化密钥会话，并获取会话的句柄handle。

  5. 调用OH_Huks_FinishSession结束密钥会话，获取加密后的密文。

解密

  1. 获取密钥别名。

  2. 获取待解密的密文。

  3. 调用OH_Huks_InitParamSet指定算法参数配置。

    文档中提供多个示例，当使用不同算法时，请注意配置对应参数。

    • 使用AES算法解密，用例中选取的分组模式为GCM时，必须要填参数NONCE和参数AEAD，AAD可选，请见开发案例：AES/GCM/NoPadding。
    • 其余示例参数与加密要求一致。

    详细规格请参考加密/解密介绍及算法规格。

  4. 调用OH_Huks_InitSession初始化密钥会话，并获取会话的句柄handle。

  5. 调用OH_Huks_FinishSession结束密钥会话，获取解密后的数据。

删除密钥

当密钥废弃不用时，需要调用OH_Huks_DeleteKeyItem删除密钥，具体请参考密钥删除。

开发案例​

AES/CBC/PKCS7​

#include "huks/native_huks_api.h"
#include "huks/native_huks_param.h"
#include "napi/native_api.h"
#include <cstring>
#include "CryptoArchitectureKit/crypto_architecture_kit.h"

static OH_Huks_Result InitParamSet(struct OH_Huks_ParamSet **paramSet, const struct OH_Huks_Param *params,
    uint32_t paramCount)
{
    OH_Huks_Result ret = OH_Huks_InitParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_AddParams(*paramSet, params, paramCount);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    ret = OH_Huks_BuildParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    return ret;
}

static OH_Crypto_ErrCode genRandomNumber(uint32_t randomLength, uint8_t *out)
{
    // 创建随机数生成器。
    OH_CryptoRand *rand = nullptr;
    OH_Crypto_ErrCode ret = OH_CryptoRand_Create(&rand);
    if (ret != CRYPTO_SUCCESS) {
        return ret;
    }
    Crypto_DataBlob blob = {out, randomLength};
    // 生成指定长度的随机数。
    ret = OH_CryptoRand_GenerateRandom(rand, randomLength, &blob);
    if (ret != CRYPTO_SUCCESS) {
        OH_CryptoRand_Destroy(rand);
        return ret;
    }
    OH_CryptoRand_Destroy(rand);

    return CRYPTO_SUCCESS;
}

static const uint32_t IV_SIZE = 16;
static uint8_t IV[IV_SIZE] = {0};
static OH_Crypto_ErrCode ret = genRandomNumber(IV_SIZE, IV);
static struct OH_Huks_Param g_genEncDecParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_AES},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT | OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_AES_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_NONE},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_CBC}};

static struct OH_Huks_Param g_encryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_AES},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_AES_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_NONE},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_CBC},
    {.tag = OH_HUKS_TAG_IV,
     .blob = {
         .size = IV_SIZE,
         .data = (uint8_t *)IV
     }}};

static struct OH_Huks_Param g_decryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_AES},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_AES_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_NONE},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_CBC},
    {.tag = OH_HUKS_TAG_IV,
     .blob = {
         .size = IV_SIZE,
         .data = (uint8_t *)IV
     }}};

static const uint32_t AES_COMMON_SIZE = 1024;
OH_Huks_Result HksAesCipherTestEncrypt(const struct OH_Huks_Blob *keyAlias,
                                       const struct OH_Huks_ParamSet *encryptParamSet,
                                       const struct OH_Huks_Blob *inData, struct OH_Huks_Blob *cipherText)
{
    uint8_t handleE[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleEncrypt = {sizeof(uint64_t), handleE};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, encryptParamSet, &handleEncrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleEncrypt, encryptParamSet, inData, cipherText);
    return ret;
}

OH_Huks_Result HksAesCipherTestDecrypt(const struct OH_Huks_Blob *keyAlias,
                                       const struct OH_Huks_ParamSet *decryptParamSet,
                                       const struct OH_Huks_Blob *cipherText, struct OH_Huks_Blob *plainText,
                                       const struct OH_Huks_Blob *inData)
{
    uint8_t handleD[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleDecrypt = {sizeof(uint64_t), handleD};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, decryptParamSet, &handleDecrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleDecrypt, decryptParamSet, cipherText, plainText);
    return ret;
}

napi_value TestAesCbc(napi_env env, napi_callback_info info)
{
    char tmpKeyAlias[] = "test_enc_dec";
    struct OH_Huks_Blob keyAlias = {(uint32_t)strlen(tmpKeyAlias), (uint8_t *)tmpKeyAlias};
    struct OH_Huks_ParamSet *genParamSet = nullptr;
    struct OH_Huks_ParamSet *encryptParamSet = nullptr;
    struct OH_Huks_ParamSet *decryptParamSet = nullptr;
    OH_Huks_Result ohResult;
    do {
        /* 1. 模拟生成密钥场景 */
        /*
         * 1.1. 获取生成密钥算法参数配置
         */
        ohResult = InitParamSet(&genParamSet, g_genEncDecParams, sizeof(g_genEncDecParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /*
         * 1.2. 调用generateKeyItem
         */
        ohResult = OH_Huks_GenerateKeyItem(&keyAlias, genParamSet, nullptr);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 2. 模拟加密场景 */
        /*
         * 2.1. 获取加密算法参数配置
         */
        ohResult = InitParamSet(&encryptParamSet, g_encryptParams, sizeof(g_encryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        char tmpInData[] = "AES_ECB_INDATA_1";
        struct OH_Huks_Blob inData = {(uint32_t)strlen(tmpInData), (uint8_t *)tmpInData};
        uint8_t cipher[AES_COMMON_SIZE] = {0};
        struct OH_Huks_Blob cipherText = {AES_COMMON_SIZE, cipher};
        /*
         * 2.2. 调用HksAesCipherTestEncrypt获取加密后的密文
         */
        ohResult = HksAesCipherTestEncrypt(&keyAlias, encryptParamSet, &inData, &cipherText);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 3. 模拟解密场景 */
        /*
         * 3.1. 获取解密算法参数配置
         */
        ohResult = InitParamSet(&decryptParamSet, g_decryptParams, sizeof(g_decryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        uint8_t plain[AES_COMMON_SIZE] = {0};
        struct OH_Huks_Blob plainText = {AES_COMMON_SIZE, plain};
        /*
         * 3.2. 调用HksAesCipherTestDecrypt获取解密后的数据
         */
        ohResult = HksAesCipherTestDecrypt(&keyAlias, decryptParamSet, &cipherText, &plainText, &inData);
    } while (0);
    /* 4. 模拟删除密钥场景 */
    /*
     * 4.1. 调用deleteKeyItem删除密钥
     */
    (void)OH_Huks_DeleteKeyItem(&keyAlias, genParamSet);

    OH_Huks_FreeParamSet(&genParamSet);
    OH_Huks_FreeParamSet(&encryptParamSet);
    OH_Huks_FreeParamSet(&decryptParamSet);
    
    napi_value ret;
    napi_create_int32(env, ohResult.errorCode, &ret);
    return ret;
}

AES/GCM/NoPadding​

准备加解密密钥材料：

#include "huks/native_huks_api.h"
#include "huks/native_huks_param.h"
#include "napi/native_api.h"
#include <cstring>
#include "CryptoArchitectureKit/crypto_architecture_kit.h"

static OH_Huks_Result InitParamSet(struct OH_Huks_ParamSet **paramSet, const struct OH_Huks_Param *params,
    uint32_t paramCount)
{
    OH_Huks_Result ret = OH_Huks_InitParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_AddParams(*paramSet, params, paramCount);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    ret = OH_Huks_BuildParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    return ret;
}

static OH_Crypto_ErrCode genRandomNumber(uint32_t randomLength, uint8_t *out)
{
    // 创建随机数生成器。
    OH_CryptoRand *rand = nullptr;
    OH_Crypto_ErrCode ret = OH_CryptoRand_Create(&rand);
    if (ret != CRYPTO_SUCCESS) {
        return ret;
    }
    Crypto_DataBlob blob = {out, randomLength};
    // 生成指定长度的随机数。
    ret = OH_CryptoRand_GenerateRandom(rand, randomLength, &blob);
    if (ret != CRYPTO_SUCCESS) {
        OH_CryptoRand_Destroy(rand);
        return ret;
    }
    OH_CryptoRand_Destroy(rand);
 
    return CRYPTO_SUCCESS;
}

static const uint32_t NONCE_SIZE = 12;
static const uint32_t AAD_SIZE = 16;
static const uint32_t AE_TAG_SIZE = 16;
static char AEAD[AE_TAG_SIZE] = {0};
static char AAD[AAD_SIZE] = "cdcdcdcdcdcdcdc"; // this is a test value, for real use it should be different every time
static uint8_t NONCE[NONCE_SIZE] = {0};
static OH_Crypto_ErrCode ret = genRandomNumber(NONCE_SIZE, NONCE);
static struct OH_Huks_Param g_genEncDecParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_AES},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT | OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_AES_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_NONE},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_GCM}};

static struct OH_Huks_Param g_encryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_AES},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_AES_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_NONE},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_GCM},
    {.tag = OH_HUKS_TAG_NONCE,
     .blob = {
         .size = NONCE_SIZE,
         .data = (uint8_t *)NONCE // this is a test value, for real use the iv should be different every time
     }},
    {.tag = OH_HUKS_TAG_ASSOCIATED_DATA,
     .blob = {
         .size = AAD_SIZE,
         .data = (uint8_t *)AAD // this is a test value, for real use the iv should be different every time
     }}};

static struct OH_Huks_Param g_decryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_AES},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_AES_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_NONE},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_GCM},
    {.tag = OH_HUKS_TAG_NONCE,
     .blob = {
         .size = NONCE_SIZE,
         .data = (uint8_t *)NONCE // this is a test value, for real use the iv should be different every time
     }},
    {.tag = OH_HUKS_TAG_ASSOCIATED_DATA,
     .blob = {
         .size = AAD_SIZE,
         .data = (uint8_t *)AAD // this is a test value, for real use the iv should be different every time
     }},
    {.tag = OH_HUKS_TAG_AE_TAG,
     .blob = {
         .size = AE_TAG_SIZE,
         .data = (uint8_t *)AEAD // this is a test value, for real use the iv should be different every time
     }}};

static const uint32_t AES_GCM_SIZE = 1024;
OH_Huks_Result HksAesGcmTestEncrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *encryptParamSet,
    const struct OH_Huks_Blob *inData, struct OH_Huks_Blob *cipherText)
{
    uint8_t handleE[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleEncrypt = {sizeof(uint64_t), handleE};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, encryptParamSet, &handleEncrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleEncrypt, encryptParamSet, inData, cipherText);
    return ret;
}

OH_Huks_Result HksAesGcmTestDecrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *decryptParamSet,
    const struct OH_Huks_Blob *cipherText, struct OH_Huks_Blob *plainText,
    const struct OH_Huks_Blob *inData)
{
    uint8_t handleD[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleDecrypt = {sizeof(uint64_t), handleD};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, decryptParamSet, &handleDecrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleDecrypt, decryptParamSet, cipherText, plainText);
    return ret;
}

执行加解密流程：

napi_value TestAesGcm(napi_env env, napi_callback_info info)
{
    char tmpKeyAlias[] = "test_enc_dec";
    struct OH_Huks_Blob keyAlias = {(uint32_t)strlen(tmpKeyAlias), (uint8_t *)tmpKeyAlias};
    struct OH_Huks_ParamSet *genParamSet = nullptr;
    struct OH_Huks_ParamSet *encryptParamSet = nullptr;
    struct OH_Huks_ParamSet *decryptParamSet = nullptr;
    OH_Huks_Result ohResult;
    do {
        /* 1. 模拟生成密钥场景 */
        /*
         * 1.1. 获取生成密钥算法参数配置
         */
        ohResult = InitParamSet(&genParamSet, g_genEncDecParams, sizeof(g_genEncDecParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /*
         * 1.2. 调用generateKeyItem
         */
        ohResult = OH_Huks_GenerateKeyItem(&keyAlias, genParamSet, nullptr);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 2. 模拟加密场景 */
        /*
         * 2.1. 获取加密算法参数配置
         */
        ohResult = InitParamSet(&encryptParamSet, g_encryptParams, sizeof(g_encryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        char tmpInData[] = "AES_GCM_INDATA_1";
        struct OH_Huks_Blob inData = {(uint32_t)strlen(tmpInData), (uint8_t *)tmpInData};
        uint8_t cipher[AES_GCM_SIZE] = {0};
        struct OH_Huks_Blob cipherText = {AES_GCM_SIZE, cipher};
        /*
         * 2.2. 调用HksAesGcmTestEncrypt获取加密后的密文
         */
        ohResult = HksAesGcmTestEncrypt(&keyAlias, encryptParamSet, &inData, &cipherText);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 3. 模拟解密场景 */
        /*
         * 3.1. 获取解密算法参数配置
         */
        strncpy(AEAD, (char *)cipherText.data + strlen(tmpInData), AE_TAG_SIZE);
        cipherText.data[strlen(tmpInData)] = '\0';
        cipherText.size -= AE_TAG_SIZE;
        ohResult = InitParamSet(&decryptParamSet, g_decryptParams, sizeof(g_decryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /*
         * 3.2. 调用HksAesGcmTestDecrypt获取解密后的数据
         */
        uint8_t plainBuffer[AES_GCM_SIZE] = {0};
        struct OH_Huks_Blob plainText = {AES_GCM_SIZE, plainBuffer};
        ohResult = HksAesGcmTestDecrypt(&keyAlias, decryptParamSet, &cipherText, &plainText, &inData);
    } while (0);
    /* 4. 模拟删除密钥场景 */
    /*
     * 4.1. 调用deleteKeyItem删除密钥
     */
    (void)OH_Huks_DeleteKeyItem(&keyAlias, genParamSet);

    OH_Huks_FreeParamSet(&genParamSet);
    OH_Huks_FreeParamSet(&encryptParamSet);
    OH_Huks_FreeParamSet(&decryptParamSet);
    
    napi_value ret;
    napi_create_int32(env, ohResult.errorCode, &ret);
    return ret;
}

AES/CCM/NoPadding​

#include "huks/native_huks_api.h"
#include "huks/native_huks_param.h"
#include "napi/native_api.h"
#include <string.h>

static const uint32_t IV_SIZE = 16;
static const uint32_t AEAD_TAG_LEN = 14;
static char IV[IV_SIZE] = { 0 }; // this is a test value, for real use the iv should be different every time.
static char AEAD[AEAD_TAG_LEN] = { 0 };
static char NONCE[OH_HUKS_AE_NONCE_LEN] = { 0 };
static struct OH_Huks_Param g_genEncDecParams[] = {
    {
        .tag = OH_HUKS_TAG_ALGORITHM,
        .uint32Param = OH_HUKS_ALG_AES
    }, {
        .tag = OH_HUKS_TAG_PURPOSE,
        .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT | OH_HUKS_KEY_PURPOSE_DECRYPT
    }, {
        .tag = OH_HUKS_TAG_KEY_SIZE,
        .uint32Param = OH_HUKS_AES_KEY_SIZE_256
    }, {
        .tag = OH_HUKS_TAG_PADDING,
        .uint32Param = OH_HUKS_PADDING_NONE
    }, {
        .tag = OH_HUKS_TAG_BLOCK_MODE,
        .uint32Param = OH_HUKS_MODE_CCM
    }
};
static struct OH_Huks_Param g_encryptParams[] = {
    {
        .tag = OH_HUKS_TAG_ALGORITHM,
        .uint32Param = OH_HUKS_ALG_AES
    }, {
        .tag = OH_HUKS_TAG_PURPOSE,
        .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT
    }, {
        .tag = OH_HUKS_TAG_KEY_SIZE,
        .uint32Param = OH_HUKS_AES_KEY_SIZE_256
    }, {
        .tag = OH_HUKS_TAG_PADDING,
        .uint32Param = OH_HUKS_PADDING_NONE
    }, {
        .tag = OH_HUKS_TAG_BLOCK_MODE,
        .uint32Param = OH_HUKS_MODE_CCM
    }, {
        .tag = OH_HUKS_TAG_IV,
        .blob = {
            .size = IV_SIZE,
            .data = (uint8_t *)IV // this is a test value, for real use the iv should be different every time.
        }
    }, {
        .tag = OH_HUKS_TAG_NONCE,
        .blob = {
            .size = OH_HUKS_AE_NONCE_LEN,
            .data = (uint8_t *)NONCE
        }
    }, {
        .tag = OH_HUKS_TAG_AE_TAG_LEN,
        .uint32Param = AEAD_TAG_LEN
    }
};
static struct OH_Huks_Param g_decryptParams[] = {
    {
        .tag = OH_HUKS_TAG_ALGORITHM,
        .uint32Param = OH_HUKS_ALG_AES
    }, {
        .tag = OH_HUKS_TAG_PURPOSE,
        .uint32Param = OH_HUKS_KEY_PURPOSE_DECRYPT
    }, {
        .tag = OH_HUKS_TAG_KEY_SIZE,
        .uint32Param = OH_HUKS_AES_KEY_SIZE_256
    }, {
        .tag = OH_HUKS_TAG_PADDING,
        .uint32Param = OH_HUKS_PADDING_NONE
    }, {
        .tag = OH_HUKS_TAG_BLOCK_MODE,
        .uint32Param = OH_HUKS_MODE_CCM
    }, {
        .tag = OH_HUKS_TAG_IV,
        .blob = {
            .size = IV_SIZE,
            .data = (uint8_t *)IV // this is a test value, for real use the iv should be different every time.
        }
    }, {
        .tag = OH_HUKS_TAG_NONCE,
        .blob = {
            .size = OH_HUKS_AE_NONCE_LEN,
            .data = (uint8_t *)NONCE
        }
    }, {
        .tag = OH_HUKS_TAG_AE_TAG,
        .blob = {
            .size = AEAD_TAG_LEN,
            .data = (uint8_t *)AEAD
        }
    }, {
        .tag = OH_HUKS_TAG_AE_TAG_LEN,
        .uint32Param = AEAD_TAG_LEN
    }
};
static const uint32_t AES_COMMON_SIZE = 1024;

OH_Huks_Result InitParamSet(
    struct OH_Huks_ParamSet **paramSet,
    const struct OH_Huks_Param *params,
    uint32_t paramCount)
{
    OH_Huks_Result ret = OH_Huks_InitParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_AddParams(*paramSet, params, paramCount);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    ret = OH_Huks_BuildParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    return ret;
}

OH_Huks_Result HksAesCipherTestEncrypt(
        const struct OH_Huks_Blob *keyAlias, const struct OH_Huks_ParamSet *encryptParamSet,
        const struct OH_Huks_Blob *inData, struct OH_Huks_Blob *cipherText)
{
    uint8_t handleE[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleEncrypt = {sizeof(uint64_t), handleE};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, encryptParamSet, &handleEncrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleEncrypt, encryptParamSet, inData, cipherText);
    return ret;
}

OH_Huks_Result HksAesCipherTestDecrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *decryptParamSet, const struct OH_Huks_Blob *cipherText,
    struct OH_Huks_Blob *plainText)
{
    uint8_t handleD[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleDecrypt = {sizeof(uint64_t), handleD};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, decryptParamSet, &handleDecrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleDecrypt, decryptParamSet, cipherText, plainText);
    return ret;
}

static napi_value EncDecKey(napi_env env, napi_callback_info info)
{
    char tmpKeyAlias[] = "test_aes_ccm_enc_dec";
    struct OH_Huks_Blob keyAlias = { (uint32_t)strlen(tmpKeyAlias), (uint8_t *)tmpKeyAlias };
    struct OH_Huks_ParamSet *genParamSet = nullptr;
    struct OH_Huks_ParamSet *encryptParamSet = nullptr;
    struct OH_Huks_ParamSet *decryptParamSet = nullptr;
    OH_Huks_Result ohResult;
    do {
        /* 1. Generate Key */
        /*
        * 模拟生成密钥场景
        * 1.1. 确定密钥别名
        */
        /*
        * 1.2. 获取生成密钥算法参数配置
        */
        ohResult = InitParamSet(&genParamSet, g_genEncDecParams, sizeof(g_genEncDecParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /*
        * 1.3. 调用generateKeyItem
        */
        ohResult = OH_Huks_GenerateKeyItem(&keyAlias, genParamSet, nullptr);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 2. Encrypt */
        /*
        * 模拟加密场景
        * 2.1. 获取密钥别名
        */
        /*
        * 2.2. 获取待加密的数据
        */
        /*
        * 2.3. 获取加密算法参数配置
        */
        ohResult = InitParamSet(&encryptParamSet, g_encryptParams, sizeof(g_encryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        char tmpInData[] = "AES_CCM_INDATA_1";
        uint32_t dataLen = (uint32_t)strlen(tmpInData);
        struct OH_Huks_Blob inData = { dataLen, (uint8_t *)tmpInData };
        uint8_t cipher[AES_COMMON_SIZE] = {0};
        struct OH_Huks_Blob cipherText = {AES_COMMON_SIZE, cipher};
        /*
        * 2.4. 调用initSession获取handle
        */
        /*
        * 2.5. 调用finishSession获取加密后的密文
        */
        ohResult = HksAesCipherTestEncrypt(&keyAlias, encryptParamSet, &inData, &cipherText);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        strncpy(AEAD, (char *)cipherText.data + dataLen, AEAD_TAG_LEN);
        cipherText.data[dataLen] = '\0';
        cipherText.size -= AEAD_TAG_LEN;
        /* 3. Decrypt */
        /*
        * 模拟解密场景
        * 3.1. 获取密钥别名
        */
        /*
        * 3.2. 获取待解密的密文
        */
        /*
        * 3.3. 获取解密算法参数配置
        */
        ohResult = InitParamSet(&decryptParamSet, g_decryptParams, sizeof(g_decryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        uint8_t plain[AES_COMMON_SIZE] = {0};
        struct OH_Huks_Blob plainText = {AES_COMMON_SIZE, plain};
        /*
        * 3.4. 调用initSession获取handle
        */
        /*
        * 3.5. 调用finishSession获取解密后的数据
        */
        ohResult = HksAesCipherTestDecrypt(&keyAlias, decryptParamSet, &cipherText, &plainText);
    } while (0);
    /* 4. Delete Key */
    /*
    * 模拟删除密钥场景
    * 4.1. 获取密钥别名
    */
    /*
    * 4.2. 调用deleteKeyItem删除密钥
    */
    (void)OH_Huks_DeleteKeyItem(&keyAlias, genParamSet);
        
    OH_Huks_FreeParamSet(&genParamSet);
    OH_Huks_FreeParamSet(&encryptParamSet);
    OH_Huks_FreeParamSet(&decryptParamSet);
    
    napi_value ret;
    napi_create_int32(env, ohResult.errorCode, &ret);
    return ret;
}

RSA/ECB/PKCS1_V1_5​

#include "huks/native_huks_api.h"
#include "huks/native_huks_param.h"
#include "napi/native_api.h"
#include <cstring>

static OH_Huks_Result InitParamSet(struct OH_Huks_ParamSet **paramSet, const struct OH_Huks_Param *params,
                                   uint32_t paramCount)
{
    OH_Huks_Result ret = OH_Huks_InitParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_AddParams(*paramSet, params, paramCount);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    ret = OH_Huks_BuildParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    return ret;
}

static struct OH_Huks_Param g_genEncDecParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_RSA},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT | OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_RSA_KEY_SIZE_1024},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_ECB},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_PKCS1_V1_5},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_NONE}};

static struct OH_Huks_Param g_encryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_RSA},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_RSA_KEY_SIZE_1024},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_PKCS1_V1_5},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_ECB},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_NONE}};

static struct OH_Huks_Param g_decryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_RSA},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_RSA_KEY_SIZE_1024},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_PKCS1_V1_5},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_ECB},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_NONE}};

static const uint32_t RSA_COMMON_SIZE = 1024;
OH_Huks_Result HksRsaPkcsTestEncrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *encryptParamSet,
    const struct OH_Huks_Blob *inData, struct OH_Huks_Blob *cipherText)
{
    uint8_t handleE[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleEncrypt = {sizeof(uint64_t), handleE};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, encryptParamSet, &handleEncrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleEncrypt, encryptParamSet, inData, cipherText);
    return ret;
}

OH_Huks_Result HksRsaPkcsTestDecrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *decryptParamSet,
    const struct OH_Huks_Blob *cipherText, struct OH_Huks_Blob *plainText,
    const struct OH_Huks_Blob *inData)
{
    uint8_t handleD[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleDecrypt = {sizeof(uint64_t), handleD};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, decryptParamSet, &handleDecrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleDecrypt, decryptParamSet, cipherText, plainText);
    return ret;
}

napi_value TestRsaEcbPkcs(napi_env env, napi_callback_info info)
{
    char tmpKeyAlias[] = "test_enc_dec";
    struct OH_Huks_Blob keyAlias = {(uint32_t)strlen(tmpKeyAlias), (uint8_t *)tmpKeyAlias};
    struct OH_Huks_ParamSet *genParamSet = nullptr;
    struct OH_Huks_ParamSet *encryptParamSet = nullptr;
    struct OH_Huks_ParamSet *decryptParamSet = nullptr;
    OH_Huks_Result ohResult;
    do {
        /* 1. 模拟生成密钥场景 */
        /*
         * 1.1. 获取生成密钥算法参数配置
         */
        ohResult = InitParamSet(&genParamSet, g_genEncDecParams, sizeof(g_genEncDecParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /*
         * 1.2. 调用generateKeyItem
         */
        ohResult = OH_Huks_GenerateKeyItem(&keyAlias, genParamSet, nullptr);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 2. 模拟加密场景 */
        /*
         * 2.1. 获取加密算法参数配置
         */
        ohResult = InitParamSet(&encryptParamSet, g_encryptParams, sizeof(g_encryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        char tmpInData[] = "RSA_ECB_OAEP_IN";
        struct OH_Huks_Blob inData = {(uint32_t)strlen(tmpInData), (uint8_t *)tmpInData};
        uint8_t cipher[RSA_COMMON_SIZE] = {0};
        struct OH_Huks_Blob cipherText = {RSA_COMMON_SIZE, cipher};
        /*
         * 2.2. 调用HksRsaPkcsTestEncrypt获取加密后的密文
         */
        ohResult = HksRsaPkcsTestEncrypt(&keyAlias, encryptParamSet, &inData, &cipherText);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 3. 模拟解密场景 */
        /*
         * 3.1. 获取解密算法参数配置
         */
        ohResult = InitParamSet(&decryptParamSet, g_decryptParams, sizeof(g_decryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        uint8_t plain[RSA_COMMON_SIZE] = {0};
        struct OH_Huks_Blob plainText = {RSA_COMMON_SIZE, plain};
        /*
         * 3.2. 调用HksRsaPkcsTestDecrypt获取解密后的数据
         */
        ohResult = HksRsaPkcsTestDecrypt(&keyAlias, decryptParamSet, &cipherText, &plainText, &inData);
    } while (0);
    /* 4. 模拟删除密钥场景 */
    /*
     * 4.1. 调用deleteKeyItem删除密钥
     */
    (void)OH_Huks_DeleteKeyItem(&keyAlias, genParamSet);

    OH_Huks_FreeParamSet(&genParamSet);
    OH_Huks_FreeParamSet(&encryptParamSet);
    OH_Huks_FreeParamSet(&decryptParamSet);
    
    napi_value ret;
    napi_create_int32(env, ohResult.errorCode, &ret);
    return ret;
}

RSA/ECB/OAEP/SHA256​

#include "huks/native_huks_api.h"
#include "huks/native_huks_param.h"
#include "napi/native_api.h"
#include <cstring>

static OH_Huks_Result InitParamSet(struct OH_Huks_ParamSet **paramSet, const struct OH_Huks_Param *params,
    uint32_t paramCount)
{
    OH_Huks_Result ret = OH_Huks_InitParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_AddParams(*paramSet, params, paramCount);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    ret = OH_Huks_BuildParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    return ret;
}

static struct OH_Huks_Param g_genEncDecParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_RSA},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT | OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_RSA_KEY_SIZE_1024},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_OAEP},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_ECB},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_SHA256}};

static struct OH_Huks_Param g_encryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_RSA},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_RSA_KEY_SIZE_1024},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_OAEP},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_ECB},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_SHA256}};

static struct OH_Huks_Param g_decryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_RSA},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_RSA_KEY_SIZE_1024},
    {.tag = OH_HUKS_TAG_PADDING, .uint32Param = OH_HUKS_PADDING_OAEP},
    {.tag = OH_HUKS_TAG_BLOCK_MODE, .uint32Param = OH_HUKS_MODE_ECB},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_SHA256}};

static const uint32_t RSA_COMMON_SIZE = 1024;
OH_Huks_Result HksRsaOaepTestEncrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *encryptParamSet,
    const struct OH_Huks_Blob *inData, struct OH_Huks_Blob *cipherText)
{
    uint8_t handleE[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleEncrypt = {sizeof(uint64_t), handleE};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, encryptParamSet, &handleEncrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleEncrypt, encryptParamSet, inData, cipherText);
    return ret;
}

OH_Huks_Result HksRsaOaepTestDecrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *decryptParamSet,
    const struct OH_Huks_Blob *cipherText, struct OH_Huks_Blob *plainText,
    const struct OH_Huks_Blob *inData)
{
    uint8_t handleD[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleDecrypt = {sizeof(uint64_t), handleD};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, decryptParamSet, &handleDecrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleDecrypt, decryptParamSet, cipherText, plainText);
    return ret;
}

napi_value TestRsaEcbOaep(napi_env env, napi_callback_info info)
{
    char tmpKeyAlias[] = "test_enc_dec";
    struct OH_Huks_Blob keyAlias = {(uint32_t)strlen(tmpKeyAlias), (uint8_t *)tmpKeyAlias};
    struct OH_Huks_ParamSet *genParamSet = nullptr;
    struct OH_Huks_ParamSet *encryptParamSet = nullptr;
    struct OH_Huks_ParamSet *decryptParamSet = nullptr;
    OH_Huks_Result ohResult;
    do {
        /* 1. 模拟生成密钥场景 */
        /*
         * 1.1. 获取生成密钥算法参数配置
         */
        ohResult = InitParamSet(&genParamSet, g_genEncDecParams, sizeof(g_genEncDecParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /*
         * 1.2. 调用generateKeyItem
         */
        ohResult = OH_Huks_GenerateKeyItem(&keyAlias, genParamSet, nullptr);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 2. 模拟加密场景 */
        /*
         * 2.1. 获取加密算法参数配置
         */
        ohResult = InitParamSet(&encryptParamSet, g_encryptParams, sizeof(g_encryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        char tmpInData[] = "RSA_ECB_OAEP_IN";
        struct OH_Huks_Blob inData = {(uint32_t)strlen(tmpInData), (uint8_t *)tmpInData};
        uint8_t cipher[RSA_COMMON_SIZE] = {0};
        struct OH_Huks_Blob cipherText = {RSA_COMMON_SIZE, cipher};
        /*
         * 2.2. 调用HksRsaOaepTestEncrypt获取加密后的密文
         */
        ohResult = HksRsaOaepTestEncrypt(&keyAlias, encryptParamSet, &inData, &cipherText);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 3. 模拟解密场景 */
        /*
         * 3.1. 获取解密算法参数配置
         */
        ohResult = InitParamSet(&decryptParamSet, g_decryptParams, sizeof(g_decryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        uint8_t plain[RSA_COMMON_SIZE] = {0};
        struct OH_Huks_Blob plainText = {RSA_COMMON_SIZE, plain};
        /*
         * 3.2. 调用HksRsaOaepTestDecrypt获取解密后的数据
         */
        ohResult = HksRsaOaepTestDecrypt(&keyAlias, decryptParamSet, &cipherText, &plainText, &inData);
    } while (0);
    /* 4. 模拟删除密钥场景 */
    /*
     * 4.1. 调用deleteKeyItem删除密钥
     */
    (void)OH_Huks_DeleteKeyItem(&keyAlias, genParamSet);

    OH_Huks_FreeParamSet(&genParamSet);
    OH_Huks_FreeParamSet(&encryptParamSet);
    OH_Huks_FreeParamSet(&decryptParamSet);
    
    napi_value ret;
    napi_create_int32(env, ohResult.errorCode, &ret);
    return ret;
}

SM2​

#include "huks/native_huks_api.h"
#include "huks/native_huks_param.h"
#include "napi/native_api.h"
#include <cstring>

static OH_Huks_Result InitParamSet(struct OH_Huks_ParamSet **paramSet, const struct OH_Huks_Param *params,
    uint32_t paramCount)
{
    OH_Huks_Result ret = OH_Huks_InitParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_AddParams(*paramSet, params, paramCount);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    ret = OH_Huks_BuildParamSet(paramSet);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        OH_Huks_FreeParamSet(paramSet);
        return ret;
    }
    return ret;
}

static struct OH_Huks_Param g_genEncDecParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_SM2},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT | OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_SM2_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_SM3}};

static struct OH_Huks_Param g_encryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_SM2},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_ENCRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_SM2_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_SM3}};

static struct OH_Huks_Param g_decryptParams[] = {
    {.tag = OH_HUKS_TAG_ALGORITHM, .uint32Param = OH_HUKS_ALG_SM2},
    {.tag = OH_HUKS_TAG_PURPOSE, .uint32Param = OH_HUKS_KEY_PURPOSE_DECRYPT},
    {.tag = OH_HUKS_TAG_KEY_SIZE, .uint32Param = OH_HUKS_SM2_KEY_SIZE_256},
    {.tag = OH_HUKS_TAG_DIGEST, .uint32Param = OH_HUKS_DIGEST_SM3}};

static const uint32_t SM2_SIZE = 1024;
OH_Huks_Result HksSm2TestEncrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *encryptParamSet,
    const struct OH_Huks_Blob *inData, struct OH_Huks_Blob *cipherText)
{
    uint8_t handleE[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleEncrypt = {sizeof(uint64_t), handleE};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, encryptParamSet, &handleEncrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleEncrypt, encryptParamSet, inData, cipherText);
    return ret;
}

OH_Huks_Result HksSm2TestDecrypt(const struct OH_Huks_Blob *keyAlias,
    const struct OH_Huks_ParamSet *decryptParamSet,
    const struct OH_Huks_Blob *cipherText, struct OH_Huks_Blob *plainText,
    const struct OH_Huks_Blob *inData)
{
    uint8_t handleD[sizeof(uint64_t)] = {0};
    struct OH_Huks_Blob handleDecrypt = {sizeof(uint64_t), handleD};
    OH_Huks_Result ret = OH_Huks_InitSession(keyAlias, decryptParamSet, &handleDecrypt, nullptr);
    if (ret.errorCode != OH_HUKS_SUCCESS) {
        return ret;
    }
    ret = OH_Huks_FinishSession(&handleDecrypt, decryptParamSet, cipherText, plainText);
    return ret;
}

napi_value TestSm2(napi_env env, napi_callback_info info)
{
    char tmpKeyAlias[] = "test_sm2key";
    struct OH_Huks_Blob keyAlias = {(uint32_t)strlen(tmpKeyAlias), (uint8_t *)tmpKeyAlias};
    struct OH_Huks_ParamSet *genParamSet = nullptr;
    struct OH_Huks_ParamSet *encryptParamSet = nullptr;
    struct OH_Huks_ParamSet *decryptParamSet = nullptr;
    OH_Huks_Result ohResult;
    do {
        /* 1. 模拟生成密钥场景 */
        /*
         * 1.1. 获取生成密钥算法参数配置
         */
        ohResult = InitParamSet(&genParamSet, g_genEncDecParams, sizeof(g_genEncDecParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /*
         * 1.2. 调用generateKeyItem
         */
        ohResult = OH_Huks_GenerateKeyItem(&keyAlias, genParamSet, nullptr);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 2. 模拟加密场景 */
        /*
         * 2.1. 获取加密算法参数配置
         */
        ohResult = InitParamSet(&encryptParamSet, g_encryptParams, sizeof(g_encryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        char tmpInData[] = "AES_ECB_INDATA_1";
        struct OH_Huks_Blob inData = {(uint32_t)strlen(tmpInData), (uint8_t *)tmpInData};
        uint8_t cipher[SM2_SIZE] = {0};
        struct OH_Huks_Blob cipherText = {SM2_SIZE, cipher};
        /*
         * 2.2. 调用HksSm2TestEncrypt获取加密后的密文
         */
        ohResult = HksSm2TestEncrypt(&keyAlias, encryptParamSet, &inData, &cipherText);
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        /* 3. 模拟解密场景 */
        /*
         * 3.1. 获取解密算法参数配置
         */
        ohResult = InitParamSet(&decryptParamSet, g_decryptParams, sizeof(g_decryptParams) / sizeof(OH_Huks_Param));
        if (ohResult.errorCode != OH_HUKS_SUCCESS) {
            break;
        }
        uint8_t plain[SM2_SIZE] = {0};
        struct OH_Huks_Blob plainText = {SM2_SIZE, plain};
        /*
         * 3.2. 调用HksSm2TestDecrypt获取解密后的数据
         */
        ohResult = HksSm2TestDecrypt(&keyAlias, decryptParamSet, &cipherText, &plainText, &inData);
    } while (0);
    /* 4. 模拟删除密钥场景 */
    /*
     * 4.1. 调用deleteKeyItem删除密钥
     */
    (void)OH_Huks_DeleteKeyItem(&keyAlias, genParamSet);

    OH_Huks_FreeParamSet(&genParamSet);
    OH_Huks_FreeParamSet(&encryptParamSet);
    OH_Huks_FreeParamSet(&decryptParamSet);
    
    napi_value ret;
    napi_create_int32(env, ohResult.errorCode, &ret);
    return ret;
}